What is ip
Last updated: April 1, 2026
Key Facts
- IP operates at the network layer (Layer 3) of the OSI model, handling packet routing across networks
- IPv4 uses 32-bit addresses (e.g., 192.168.1.1) while IPv6 uses 128-bit addresses to accommodate more devices
- Every device connected to the internet has an IP address that uniquely identifies it for sending and receiving data
- IP is connectionless, meaning it does not establish connections before sending data, unlike TCP which is connection-oriented
- IP packets include header information with source/destination addresses, version, protocol type, and other routing data
What is Internet Protocol?
IP (Internet Protocol) is the primary protocol governing how data is transmitted across the internet and computer networks. Established by the Internet Engineering Task Force (IETF), IP defines how data is packaged, addressed, and routed to reach its destination. It is the foundational layer enabling all higher-level internet services like email, web browsing, and video streaming.
How IP Works
IP breaks down data into small packets, each containing the sender's IP address, the recipient's IP address, and the actual data payload. These packets are independently routed through the internet via multiple paths, potentially arriving out of order. Intermediate devices called routers read the destination IP address and forward packets toward their final destination. This packet-switching approach provides reliability and efficiency by allowing network traffic to dynamically avoid congested or failed paths.
IPv4 vs IPv6
IPv4, introduced in 1981, uses 32-bit addresses allowing for approximately 4.3 billion unique addresses. As the internet grew exponentially, this limitation became critical, leading to the development of IPv6 in 1995. IPv6 uses 128-bit addresses, supporting roughly 340 undecillion addresses—sufficient for the foreseeable future. Today, both versions coexist, though IPv6 adoption continues to increase as IPv4 address exhaustion becomes a practical concern.
IP Addresses and Routing
Each device on a network receives an IP address identifying it uniquely on the internet. Public IP addresses are globally unique and routable, while private IP addresses are used within local networks (intranets). Routers use IP addresses to determine packet forwarding paths, consulting routing tables that specify which network interfaces packets should use based on destination addresses. This hierarchical routing system enables the internet's scalability.
IP and Other Protocols
- IP is connectionless, meaning no connection establishment before data transmission
- TCP (Transmission Control Protocol) builds on IP to ensure reliable, ordered delivery
- UDP (User Datagram Protocol) uses IP for faster but unreliable delivery suitable for streaming
- ICMP (Internet Control Message Protocol) handles error reporting and diagnostics like ping
- DNS (Domain Name System) translates domain names to IP addresses for user convenience
Related Questions
What is an IP address?
An IP address is a numerical label assigned to every device on a network, identifying it for data transmission. IPv4 addresses appear as four numbers separated by dots (192.168.1.1), while IPv6 uses hexadecimal notation.
What is the difference between public and private IP addresses?
Public IP addresses are globally unique and routable on the internet, while private IP addresses are reserved for internal networks only. Private addresses cannot communicate directly over the internet without NAT translation.
Why is IPv6 needed if we have IPv4?
IPv4 has nearly exhausted its 4.3 billion available addresses due to internet growth and device proliferation. IPv6's 340 undecillion addresses provide sufficient capacity for future growth and emerging technologies like IoT.
More What Is in Daily Life
Also in Daily Life
More "What Is" Questions
Trending on WhatAnswers
Browse by Topic
Browse by Question Type
Sources
- Wikipedia - Internet ProtocolCC-BY-SA-4.0
- RFC 791 - Internet ProtocolPublic Domain